Mississippi Taped White

Fixing & Controls

Multi-directional brackets are supplied which can be face fixed or top-fixed to the wall or inside the window recess. Screws and wall plugs are not supplied as we don’t know what surface you are installing onto. Please ensure you use the correct fitting for your blinds. Please note that the length of the cords on the blinds will be half the length of the total drop of the blind.

Valance

Wood blinds are supplied with a matching valance. Recess size blinds will be made to the width of the measurement provided to fit neatly inside the recess. The valance on exact size blinds (usually chosen when installing outside of the recess) will be made wider with a return on each end to hide the brackets.

Tapes

Our wooden and faux wood blinds come with 25mm wide tapes on 50mm wide slats. As the blinds get wider, the tape quantity increases to prevent the slats from bowing when installed. There is roughly 35cm between each tape across the width of the blind faux wooden blinds. On real wooden blinds, the spacing is approximately every 38cm. These locations are pre-determined and cannot be moved or adjusted.

Headrail

Our wooden and faux wood blinds come with a sturdy, colour-coded headrail to match the colour of your slats. The dimensions on the headrails depends on the size of the slat. 50mm slats the headrail is 42mm high x 59mm deep.

Stack Height

Our wooden and faux wood blinds when fully raised will take up space in the top of your window. This depends on the total length of the blind. As a guide, we have the following stack heights. 150cm long blind = 25cm when raised. 200cm long blind = 31cm when raised. This is from the top of the headrail to the underside of the bottom bar when fully raised.

Product Imagery

Due to the different types and settings of computer monitors, the shading/colour of products may appear different on screen. Ensure that you're happy with the fabric before making a purchase by ordering a free sample. Images are for illustrative purposes only and best represent the finished product.

Returns

Our products fall under the definition of custom-made. Products can only be returned if they are faulty. Ensure you’re happy with the measurements you provide. Once your order has been placed we are unable to amend the sizes on your order.

Manufacturing Tolerance & Weight

Blinds are made within a 4mm manufacturer tolerance on both the width and drop of the blind. Blinds over 200cm wide will be heavy due to the weight of the slats, we recommend splitting them into two blinds.

Child Safe

Our blinds are child safe by design and come with the relevant child safety clips to tie cords back and away from the reach of children that must be installed.